Underfloor heating can make a room feel warm, calm and comfortable. It may also free up wall space where radiators may not suit the layout.
However, it must be designed around the property. Floor type, insulation, room size, heat demand, controls and boiler links all matter.
Allstar Systems helps homeowners, landlords and selected commercial premises across Norwich and Norfolk with underfloor heating installation, fault finding, repairs and upgrade advice.
Our team checks the floor, controls, pipework, wiring, manifolds and wider heating setup before recommending the right route.
Allstar Systems also maintains £10 million public liability insurance for plumbing and heating work across domestic and commercial premises.
A well-planned setup can spread warmth more evenly across a room. This can work well in bathrooms, kitchens, extensions and open-plan living spaces.
It can also suit homes where wall space is limited. However, it is not a one-size-fits-all option.
Before work starts, an engineer should check the floor build-up, heat loss, room use, controls and existing heating setup. This helps avoid poor performance later.
Wet underfloor heating uses warm water moving through pipes beneath the floor.
It often suits larger spaces, extensions and open-plan areas. It can also work well where a low-temperature heating design is needed.
This type must be planned carefully. Pipe spacing, flow rates, manifold position, insulation and floor finish all affect results.
A wet setup may suit:
The design should also match the boiler, controls and wider heating layout.
Electric underfloor heating uses mats or cables below the floor finish.
It often suits smaller areas, such as bathrooms, shower rooms and kitchens. It can be quicker to fit than some wet layouts.
This option may be useful where the floor area is small or where a full wet system is not practical.
However, running costs and control settings should be considered before installation. The product, floor finish and room use should all match the design.
Low-profile systems can suit existing homes, refurbishments and rooms where floor height matters.
They can help reduce the need for a deep floor build-up. This makes them useful in some renovation projects, bathroom upgrades and extensions.
However, not every floor will be suitable. The existing surface, insulation, threshold height and door clearance all need review.
A survey can help confirm whether a retrofit option will work.
Screeded layouts are often used in new builds, extensions and larger renovation projects.
Pipes sit within the floor build-up, which helps spread warmth across the space. This can provide steady heat when the design is correct.
However, planning matters. The floor structure, insulation, zones, manifold position and heat demand must all be considered before work begins.
Faults can make floors slow to warm, patchy or hard to control.
Allstar Systems can help with underfloor heating repairs in Norwich and Norfolk. Our team can inspect controls, thermostats, wiring, manifolds, pressure, valves and visible pipework where suitable.
Common issues include:
Some faults may come from the underfloor setup itself. However, others may relate to the boiler, controls, water quality or wider heating circuit.
Heating services from Allstar Systems Ltd are supported by recognised national and local accreditations. As a Which? Trusted Trader, TrustMark endorsed company and CIPHE member, customers in Norwich and Norfolk can expect high standards throughout. With OFTEC and Gas Safe registration, plus Worcester Bosch accredited installer status, all heating work is carried out safely and to manufacturer approved levels.
Good controls help each room feel right without wasting heat.
A typical setup may include room thermostats, smart controls, manifold actuators, timers, zone valves or underfloor settings.
If controls feel hard to use, old or unreliable, an upgrade may help. Smart controls can also let you adjust warmth from an app, hub or linked device.
Zoning matters too. A bathroom, kitchen and open-plan area may all need different times and temperatures.
Wet underfloor heating often uses a manifold. This helps control the flow of warm water to each zone.
If one area is cooler than another, the setup may need balancing. There may also be an issue with actuators, valves, pressure or flow.
Our team can inspect the manifold area, visible pipework and controls before explaining the next step.
Underfloor heating often works alongside radiators, boilers and hot water systems.
If the wider setup has poor flow, dirty water, weak controls or boiler issues, floor performance may drop.
Therefore, we may check related parts before recommending a repair or upgrade.
Wet underfloor heating often relies on the boiler. If the boiler struggles to heat the water or control flow, floor areas may underperform.
The boiler, pump, controls and water quality can all affect results.
Some homes use both radiators and underfloor heating. If radiators are uneven, pipework is noisy or water quality is poor, the wider circuit may need attention.
Where dirt or sludge affects flow, power flushing may help. In other cases, radiator or valve work may be more suitable.
Underfloor heating can work well in rooms where comfort underfoot matters.
It is often considered for:
Electric mats may suit smaller tiled rooms. Wet layouts may suit larger spaces or wider renovation work.
Allstar Systems follows a clear process.
This may include:
This helps customers understand what is needed before work begins.
If you need underfloor heating installation, repairs, controls, zoning or upgrade advice, Allstar Systems can help.
Contact our team to book an assessment in Norwich or across Norfolk.
Sometimes an existing setup can be improved. In other cases, a new installation may be better.
An upgrade may include:
A new installation may be better if the room is being renovated, extended or fully refloored.
This page mainly focuses on homes and rental properties.
However, Allstar Systems can also support selected commercial premises where underfloor heating is part of a suitable project.
Larger sites may need a separate assessment, especially where plant rooms, multiple zones or wider building controls are involved.
Yes. We install electric underfloor heating for bathrooms, kitchens, smaller rooms, and renovation projects where a responsive heating solution is needed.
Yes. We install water underfloor heating, also called wet underfloor heating, for larger spaces, full-property heating, and projects where long-term efficiency matters.
Yes. We diagnose faults such as cold zones, thermostat issues, wiring faults, manifold problems, and poor circulation in underfloor heating systems.
Electric underfloor heating usually suits smaller areas and room-by-room projects. Wet underfloor heating usually suits larger spaces and whole-house heating strategies.
Yes. In some properties, low profile underfloor heating or retrofit underfloor heating systems can work well where floor height is limited.
Yes. This page targets Norwich first. However, Allstar Systems also supports customers across wider Norfolk.
✓ Gas Safe & OFTEC Registered
✓ Hundreds of Happy Customers
✓ Emergency Callouts Available
✓ Professional & Friendly Engineers
